![](images/logo.gif)
Peugeot 205 Manual
Steering gear rubber bellows - renewalSuspension and steering / Steering gear rubber bellows - renewal
1 Remove the relevant track rod end, as described in Section 19.
2 Release the clips from each end of the bellows then ease the bellows from the steering gear and pull it from the track rod.
3 Clean the track rod and bellows location on the steering gear.
4 Slide the new bellows onto the track rod and steering gear, check that it is not twisted, then fit the clips.
5 Refit the track rod end with reference to Section 19.
![](images/adspic01.jpg)
![](images/adspic02.jpg)
![](images/adspic03.jpg)
![](images/adspic04.jpg)
![](images/adspic05.jpg)
![](images/adspic06.jpg)
![](images/adspic07.jpg)
![](images/adspic08.jpg)
© 2024 www.peugeot205.ru. All Rights Reserved.