Exhaust system: The exhaust system consists of front, intermediate and rear sections, the number varying according to model. The system is suspended from the underbody on rubber mountings, and bolted to the exhaust manifold at the front. Flanged joints incorporating gasket seals or pipe clamps are used to secure the sections. The front section downpipe is of twin, or “siamesed” type and is attached to the manifold by a flanged joint incorporating compression springs or by a single spherical joint. On TU series engines, a ball-and-socket type joint is provided between the front downpipe and intermediate pipes, to allow for engine movement...

• General information
• Exhaust system - removal and refitting
• Exhaust manifold - removal and refitting
• Air inlet heating system components - removal and refitting
• Crankcase ventilation system components - removal and refitting
• Electro-pneumatic ignition retarding system components - removal and refitting
• Catalytic converter - general information and precautions
• Fuel vapour recirculation system components - removal and refitting